10kW Generator + 100 Amp 12-Circuit Load Center ATS

$3,838.00

Kohler 10kW Generator with 100A Transfer Switch | Includes 100 Amp 12-Circuit Load Center ATS | Kohler 725cc OHV Engine Runs on LP or NG | RDC2 Controller for generator, ATS, Load management | Home Energy Generator Management System | No Fuel or Electrical Stub Ups Required | Kohler 5-Year/2000-Hour Warranty

Description

Kohler 10kW Generator 10RESVL-100LC12

10kW     16.8kVA Motor Starting Capacity     100-Amp 12-Circuit ATS     725cc V-Twin Engine     RDC2 Controller

The Kohler 10kW Generator 10RESVL-100LC12 is a complete Home Standby Generator Package with 100-Amp 12-Space Load Center Automatic Transfer Switch and Home Energy Generator Management System. When you lose power during an outage or blackout, the 10kW Kohler generator restores power fast to keep all your essential and critical loads up and working. The fridge and freezer stay cold, lights work, and pumps run when they should. The heat stays on in the winter and the AC runs in the summer. This generator and transfer switch will power most appliances in smaller home or a few critical items in larger homes. Restores power in as little as 10 seconds after an outage hits.

Power to start large loads without dropping power to other appliances. With a motor starting capacity of 16.8kVA, the Kohler 10RESV starts and runs up to a 3-Ton Air Conditioner in addition to a 5kW house load.

Exceptional digital voltage and frequency regulation for clean, smooth power with low harmonic distortion to protect sophisticated electronics.

Great for tight lot lines—18-inch to home installation distance.

Kohler’s 725cc KT725 4-Cycle OHV engine handles tough applications. Runs on LP or NG and easily switches between the two in the field.

Kohler 10kW Generator Features

  • Reliable Commercial-Grade Engine Runs on Propane or Natural Gas
  • Powers Heat and Air Conditioning + Appliances and Electronics
  • Suitable for Home Standby or Off-Grid Applications
  • Built-In Mounting Pad Saves Installation Time & Money—No Need for Concrete
  • Simple Terminal Block for Easy Field Connections
  • Starts and Runs Heavy Loads—16.8kVA Motor Starting Capacity
  • Steel Enclosure with Automotive-Grade Paint for Advanced Corrosion Protection’

The RDC2 Controller integrates control for the generator set, RXT transfer switch, load management, and programmable interface module (PIM.)

  • Membrane Keypad: OFF, AUTO, RUN Pushbuttons with Arrow and Select Buttons for Menus.
  • LED Indicators: OFF, AUTO, RUN Modes
  • LED Indicators: Utility Power, Generator Availability, Transfer Switch Position
  • LCD Display: 2 lines 16 Characters each with adjustable contrast for excellent visibility in all light conditions.

Includes a Kohler 5-Year / 2000-Hour Limited Warranty for on-grid (standby) installations with electric utility service.

*Requires a 12-Volt Group 51 Battery Rated for 500 Cold Cranking Amps. (Purchase Locally)

Additional information

Weight 448 lbs
Dimensions 30.6 × 28 × 32.4 in
model-number

10RESVL-100LC12

manufacturer

Kohler Energy

made-in-usa

Yes

rated-watts

10kW LP Propane | 9kW NG Natural Gas

surge-watts

16.8kVA

rated-amps

41.7 Amps LP Propane | 37.5 NG Natural Gas

voltage

120/240 Volts Single Phase

A/C Ton Rating

4-Ton

enclosure

Steel with E-Coat Corrosion Protection

ul-listed

UL-2200

decibel-rating

67 dB(A) Weekly Test | 71 dB(A) Full Speed

generator-type

Standby Generator

transfer-switch-model

RXT 100 Amp 12 Space

rated-watts-filter

10 to 12.9 kW

voltage-filter

120/240 Volts

weight

448 Pounds

dimensions

30.6L x 28W x 32.4H inches

Reviews

There are no reviews yet.

Be the first to review “10kW Generator + 100 Amp 12-Circuit Load Center ATS”

Your email address will not be published. Required fields are marked *